Easy Way to Clean Bird Tray Corner

Download Article

Download Article

Whether you want to clean one-time wood furniture, cabinets, a cutting board, forest floors, or any other type of old muddied wood, in that location are several similar methods you tin can use. No matter what method you determine to try, it'due south important to ever test it on a minor, inconspicuous area of the wood you want to clean to make certain it doesn't damage the finish or discolor the wood. And so, you lot can proceed to clean the whole wood slice to restore its shine!

1. 

   1

   Wipe downwardly the wood with a clean, dry microfiber cloth to remove dust. ^[1] This will go rid of regular amounts of dust then you tin can get to the stuck-on dirt underneath. Give the whole wood object you want to clean a thorough wipe-downwards with the cloth.^[two]

   • If at that place is a lot of grit on the wood and a dry cloth doesn't do the play a joke on, so you lot can wipe it down with a barely-clammy microfiber cloth instead to get rid off all the dust.

   Tip: Dish detergent and water works to clean off about stuck-on clay and mucilaginous spots from quondam wood. This is also a rubber method for cleaning painted forest.

2. 

   2

   Test a drib of liquid dish detergent on a hidden area of the wood. Put a driblet of balmy dish detergent onto a corner of a clean microfiber cloth. Rub information technology onto an inconspicuous expanse of the wood and lookout to encounter if it causes any discoloration or removes the stop.^[three]

   • If the wood looks the same where you examination the detergent, and then information technology'southward safe to go on with cleaning the whole slice.^[4]
   • You lot will be able to run into after a couple of minutes whether the detergent hurts the finish.

   Advertisement

3. 

   3

   Mix 2-iii drops of dish detergent in 1 cup (240 mL) of water. ^[5] Cascade approximately 1 cup (240 mL) of h2o into a bowl or container of some kind. Squeeze in 2-iii drops of mild liquid dish detergent.^[half-dozen]

   • Don't worry too much about the exact ratio, you lot just want to create a diluted dish detergent and water solution. A chip more detergent or less water won't touch on how it cleans.
   • Equally an alternative to liquid dish detergent, you tin use an oil lather. Mix the oil soap with water in the proper ratio according to the manufacturer's recommendations.

4. 

   four

   Soak a microfiber cloth in the solution and wring information technology out. Dip a clean microfiber textile into the h2o and detergent mixture and let it get completely soaked. Wring information technology out back into the container so it is simply barely damp.^[seven]

   • You don't desire to soak the woods while you lot are cleaning it, so it'due south important that the cloth isn't dripping wet.^[8]

5. 

   5

   Wipe down the whole woods piece with the wet microfiber fabric. Brush the damp cloth with light pressure over the unabridged surface of the wood. Scrub harder at any pasty or peculiarly dirty spots until they disappear.^[9]

   • Try to clean the wood equally fast every bit you lot can and so you don't let it stay wet for too long. Water can warp wood if it soaks into it.

6. 6

   Dry out off the wood with a clean, dry microfiber cloth. Wipe downwardly the wood once again thoroughly to dry out off all the areas you cleaned.^[x] Buff it in round motions with the clean, dry cloth to remove all moisture and shine it up a bit.^[xi]

   • If you still see any dirty spots afterward y'all dry the wood, then you can echo the process or try another method to get rid of it.

Advertizement

1. 1

   Work in a well-ventilated area. Work exterior if you can, or open up all doors and windows where you will work. This is to avoid breathing in the fumes of the mineral spirits.^[12]

   • Mineral spirits are too known more commonly as paint thinner.

   Tip: Mineral spirits are proficient for cleaning forest when cleaning with dish detergent and water doesn't remove all the dirt and grime. Never make clean painted wood with mineral spirits or y'all will remove the paint.

2. 

   2

   Exam the mineral spirits on an out-of-sight expanse of the wood. Put a few drops of the spirits on the corner of a clean cloth. Rub it onto a hidden area and check to meet if it damages the finish at all.^[xiii]

   • Mineral spirits are condom for most wood finishes, but make sure to always test it on a hidden surface area and check for discoloration. If at that place is no discoloration, go on with the cleaning.
   • Y'all will find right away if the mineral spirits remove whatever of the stop.

3. 

   3

   Moisten a make clean cloth with mineral spirits. Pour out enough mineral spirits to simply moisten part of the cloth without making it dripping moisture. Try to just dampen a corner of the cloth that y'all can employ to wipe downwards the slice.^[14]

   • The more mineral spirits y'all utilize, the more fumes yous will be exposed to equally well. This is why it'south of import to piece of work in a well-ventilated area and not pour out too much of the liquid onto the rag.

4. 

   iv

   Wipe downwardly the whole woods piece with the damp textile. Apply lite pressure with the damp cloth and rub information technology all over the wood to wipe abroad dirt. Scrub whatsoever stuck-on dirt spots with your finger inside a corner of the textile.^[15]

   • If the wood has any carved parts or difficult-to-achieve bits, you lot can employ an quondam toothbrush dipped in mineral spirits to get in them and scrub.

5. 5

   Wipe away residue from the spirits with a h2o-dampened cloth. Soak a make clean textile in h2o and wring information technology out firmly and then it is but barely moisture. Wipe down the whole woods piece to remove any residue from the mineral spirits.^[16]

   • If the wood is nevertheless moisture to the touch after you wipe it down, and so rub it with a clean dry cloth in circular motions to dry it off.

Ad

1. 

   1

   Create a 1/16 vinegar and h2o solution. Mix approximately 1 part white distilled vinegar with 16 parts water in a bucket or other container. This diluted vinegar solution will remove stuck-on dirt and grime from the wood yous desire to clean.

   • Information technology's important to dilute the vinegar with water equally concentrated vinegar can discolor some forest finishes.

   Tip: Employ a vinegar and water solution when soap and water doesn't clean away all the dirt. It's too an culling to mineral spirits that is less harsh on finishes and is safe to clean painted woods with.

2. 

   ii

   Test the solution on a hidden area of the wood. Dip the corner of a clean cloth into the solution. Rub it onto a small out-of-sight area of the wood and lookout man to meet if it discolors the finish.

   • If the wood looks fine afterward you test the solution, and then it's safety to continue with using the vinegar solution to make clean the whole piece.
   • Y'all volition be able to see within a couple of minutes if the solution amercement the finish at all.

3. 

   iii

   Dip the cloth into the solution and wring it out so information technology is barely moist. Soak the fabric in the solution for a few seconds. Squeeze information technology out completely until no more drops of the solution come out.

   • Alternatively, you tin can put the solution in a spray bottle and just spray it onto the fabric to moisten it.

4. 4

   Wipe the damp cloth all over the slice in circular motions. Wipe down the entire slice with light pressure. Scrub away at any sticky or specially dirty spots with the corner of the rag and your fingers.

   • If the rag gets visibly dirty, rinse it out with regular water and wring information technology out until it looks clean over again. Repeat the process until you've cleaned the whole wood piece.

5. 

   5

   Buff the forest with a clean, dry fabric. Use circular motions to vitrify abroad moisture and smoothen the finish up. Make sure to embrace all areas and so yous don't leave any water sitting on the surface of the wood.

   • If you detect whatever areas where information technology is yet dingy, but become back over them with the vinegar solution and material. If there are whatever cracks, such as decorative carved areas, then you tin can use a toothbrush dipped in the solution to scrub inside them.

Advert

Add New Question

• Question

  What mistakes can I avert when cleaning woods?

  

  Raymond Chiu is the Director of Operations for MaidSailors.com, a residential and commercial cleaning service based in New York Metropolis that provides home and role cleaning services at affordable prices. He has a Bachelors in Business Administration and Management from Baruch College.

  

  House Cleaning Professional

  Adept Respond

  Ane error is using too much solution and water, as that tin can seep into the wood and potentially harm it. Using a highly abrasive cloth or scrubbing too hard can also harm the surface of the wood. Finally, make sure to clean a examination spot in an inconspicuous area before using a production on the entire area to avoid potential, irreversible damage to the wood.

Enquire a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertisement

VideoRead Video Transcript

• If the wood still looks dirty after trying several methods of cleaning information technology, then consider refinishing information technology to restore its polish.

• After you've cleaned the wood, then you can polish it to give it an even brighter, shinier finish.

Advertizement

• Always test any solution you are going to make clean wood with on an inconspicuous expanse get-go to make sure it doesn't damage the wood.

Advertisement

Things You'll Need

• Microfiber cloths
• Liquid dish soap
• H2o
• Bowl or container

• Make clean cloths
• Mineral spirits
• Toothbrush (optional)

• Clean cloths
• Distilled white vinegar
• H2o
• Saucepan or container
• Spray canteen (optional)

About This Article

Article Summary X

To gently remove dirt and dust from old wood, all y'all demand is water, balmy dish soap, and a soft cloth. Wipe the wooden object downward with a dry out microfiber cloth to remove loose grit and dirt. So, rub an camouflaged spot with a drop of dish detergent on a make clean cloth to make sure it doesn't damage or stain the finish. If the detergent doesn't crusade whatever problems, mix 2-3 drops with a cup of h2o. Soak a clean textile in the mixture and wring it out and then it'southward damp, but not dripping wet. Wipe your wooden item downwards with the damp fabric, then gently buff it dry with a clean microfiber towel. Read on for tips on getting rid of stubborn crud with mineral spirits!

Did this summary assistance you lot?

Cheers to all authors for creating a page that has been read 35,414 times.

Did this article help you?

pattisonthur1949.blogspot.com

Source: https://www.wikihow.com/Clean-Old-Wood

Share this post